X

The Complete STAAD.Pro Course For Structural Engineers-Part1

Collapse
  • تصفية
  • الوقت
  • عرض
مسح الكل
مشاركات جديدة
  • Gold Medal
    • Sep 2018
    • 3203

    The Complete STAAD.Pro Course For Structural Engineers-Part1

    Size: 6.20 GB | Duration: 11 hours



    HTML Code:
    https://www.udemy.com/course/staadprocourse1/
    What you'll learn
    Linear Static and Dynamic Analysis of RCC Structures
    Design and Detaiiling of RCC Beams, Columns , Slabs and Foundations as per IS456, IS13920
    Composite deck and Paarmetric Modelling
    Snow Load Determination as per ASCE 07
    Determination of Rayleigh Frequency and Modal Frequency of a Structure
    Wind Loads Guidelines as per ASCE07 and ATC Hazards
    Auto Wind Load Generation on RCC Structure as per ASCE 07
    FEM Analysis and Design of Pad Eyes for Lifting Arrangement

    Requirements
    System with STAAD Pro Installed
    Basic Knowledge of Civil and Structural Engineering
    Description
    1. Basic Introduction to the STAAD Pro Software

    Before we go Professional , this lecture series is intended to teach you about the very basics and advanced basics functions of the STAAD Pro software. You will start with learning modelling , Introduction to the Graphical user Interface , Repeat Commands , Beams, Plates , Solids etc.

    Editor file is thoroughly explained with a small example of how it can be utilized to save time. The things taught is this lecture series shall serve as a kick start for the person who does not know anything about the STAAD Pro , but this shall also serve as a refreshment series for those who already know.

    At the end of this lecture series , you shall learn how to Calculate the Snow Loads and assign its definitions in software. Wind Load is very difficult to understand in the beginning , but Author explains everything in bit sizes about its Auto generation in software. Special focus is given to explain about the Frequency determination i.e. Rayleigh Frequency and Modal frequency. This is the best series for those who are absolutely new to this software.

    2. Linear Dynamic Analysis of School building as per IS 456, IS 875, IS 1893 and Detailing as per IS 13920

    This is the only exclusive course on the web that is taking the practical case study of a building starting from Reading the Architectural Drawings and going all the way to Detailing in AutoCAD.

    You shall start with learning how to read the Architectural Drawing of a School building and plan the location of RCC Columns. Next you shall learn how you can prepare the Analytical Model in STAAD. Wind and Seismic Load Definitions and Calculations are taught in great detail to help you understand how you can design wind and seismic resistant design structures. Response Spectrum Analysis is done for this model. Design and Detailing is done for this structure as per IS 456 and IS 13920:2016.

    3. FEM Analysis and Design of Pad Eyes

    STAAD Pro is an excellent FEM Analysis software , but user needs to understand how to do it correctly. You shall learn what are the practical aspects of Pad eyes , how they are used . You shall learn how you can prepare the FEM Model and read the stresses for designing after applying Loading on it.

    Who this course is for:
    Civil Engineers
    Structural Engineers
    Architects
    Students


    ,
    ,
    ,
    ,
    ,
    ,
  • VIP
    • Nov 2018
    • 7655

    #2
    جزاكَ الله خيراً أخي العزيز
  • عضو مشارك
    • Nov 2018
    • 12

    #3
    Part 3 is damaged!
  • Gold Medal
    • Sep 2018
    • 3203

    #4
    المشاركة الأصلية بواسطة majid_n
    Part 3 is damaged!
    تم تصحيح الملف
  • Gold Medal
    • Sep 2018
    • 3203

    #5
    المشاركة الأصلية بواسطة majid_n
    Part 3 is damaged!
    شكرا لك يأ خي و جزاك لله خيرا
  • الوسـام الماسـي
    • Feb 2019
    • 6297

    #6
    جزاك الله كل خير
  • Gold Medal
    • Sep 2018
    • 3203

    #7
    المشاركة الأصلية بواسطة faristorrent
    جزاك الله كل خير
    شكرا لك يأ خي و جزاك لله خيرا
Working...
X