• تصفية
  • الوقت
  • عرض
مسح الكل
مشاركات جديدة
  • عضو مُشارك
    • Nov 2018
    • 15

    Product Details
    ADAPT-RC is for the analysis and/or design of reinforced concrete beams, slabs and floor systems. It is based on a single story frame, featuring the Equivalent Frame modeling of the ACI code as an option. In its design mode, the program determines the deflection and reinforcement for a user defined geometry, material and loading. In its analysis mode, for a given floor geometry, loading and reinforcement, the software determines the capacity of the floor and compares it with the code stipulated demand. In both the design and the analysis modes, the deflections are calculated using cracked sections, with each span subdivided into 20 segments. ADAPT-RC is easy to use, yet thorough and rigorous in its formulation. Its graphical display gives a vivid account of moments, reinforcement and other parameters. ADAPT-RC handles both prismatic and non-prismatic spans, as well as supports with different boundary conditions. A solid model viewer allows the user to examine the input structure for a visual check on the accuracy of data entry. The primary application of the software is in building construction and parking structures.

    ADAPT-RC is offered in two versions, a low cost version referred to as "Standard" and a "Plus" version. The two programs are identical except that the Standard version is limited to 5 pans and two cantilevers. The Plus version goes up to 20 spans and two cantilevers.

    ADAPT-RC is a stand-alone program. But, when used together with ADAPT-Builder, it can receive input data generated graphically by the Builder. This feature of the program is discussed in greater detail under the heading ADAPT-Builder.

    An industry standard and choice of consulting engineers requiring an easy-to-use, efficient, and reliable production tool. This software is based on the time proven Equivalent Frame Method (EFM) of analysis and features the following:

    Complete modeling and design of reinforced concrete floor systems
    Simple and continuous beams and beam frames
    Multiple beam cross-section: T, L and I-section
    One-way slabs
    Two-way flat plates
    Two-way flat slabs
    Drop caps, drop panels, transverse beams, steps above and below the slab
    One-way pan joist systems
    One-way skip joist systems
    Two-way joist systems
    Waffle slabs
    Investigation mode - analysis and capacity calculation of an existing floor
    Gives the capacity of a floor system for a user-defined reinforcement distribution
    Performs capacity/demand analysis for existing floor systems
    Calculates deflection based on user specified loading and reinforcement
    Advanced analysis options
    Moment redistribution
    Inclusion of lateral loads
    Deflection calculation, including cracked section analysis
    Comprehensive design capabilities
    Reinforcement check for strength and minimum code requirements
    Beam shear and punching shear checks
    Integrated punching shear reinforcement design (studs or stirrups)
    Concise reporting
    Graphical display of moments, shears and deflections for each load combination
    Graphical and tabular display of location, length and amount of reinforcement required


    The program comes supports the following design codes:

    ACI-318 (1999 and 2005)
    IBC (International Building Code) 2003
    British-BS8110 (1997)
    Canadian-A23.3 (1994); (2004) [release 2008]
    Australian-AS3600 (2001)
    Brazilian-NBR6118 (2001)
    European EC2 (2004)


    The program supports the following units:

    American Customary

    Hardware Requirements

    PC compatible computer
    Windows operating system
    Minimum of 128 MB RAM
    10 GB hard drive

    screen shots

    download link