تم اغلاق الموضوع
X
X
 
  • Filter
  • الوقت
  • عرض
مسح الكل
مشاركات جديدة

    DLUBAL Composite Beam 8.19.01

    Dlubal Software has released 8.09.01 version of COMPOSITE-BEAM. This software analyzes continuous composite girders according to Eurocode 4. This add-on module can be used with the RSTAB program or also as an independent module that runs on RSTAB standards.

    DLUBAL Composite Beam 8.19.01

    614MB
    Updated
    16/1/2021



    #2

    DLUBAL Composite-BEAM 8.06.1103



    DLUBAL Composite-BEAM 8.06.1103

    Dlubal Software has released 8.06.1103 version of COMPOSITE-BEAM. This software analyzes continuous composite girders according to Eurocode 4. This add-on module can be used with the RSTAB program or also as an independent module that runs on RSTAB standards.

    The structure and load input in this module is done through clearly laid out masks like those found in RSTAB. When the analysis is started, the static model is generated in RSTAB with all boundary conditions and loads.

    Consequently, a safe calculation of the internal forces using the ideal cross-section properties is guaranteed.

    COMPOSITE-BEAM automatically analyzes the resulting internal forces and carries out all relevant verification according to EC 4 and following the standards in EC 2 and EC 3. The results are displayed in the spreadsheet masks.

    They are sorted by the required analysis standards and thus enable an easy orientation. The user`s control over the input as well as the interpretation of the results is facilitated through 3D visualization.

    All graphics can be edited and transferred to the Printout Report. About Dlubal Software Since its beginnings in 1987, the Dlubal company has been involved in the development of user-friendly and powerful software for structural and dynamic analysis.

    With RSTAB and RFEM Dlubal offers programs for the ambitious structural engineer that meets the requirements of modern civil engineering and mirrors the current state of art.

    RSTAB is a 3D framework program, while RFEM represents a 3D Finite Element Analysis (FEA) program. Both are the basis of a modular software system: This basic module calculates internal forces, deformations and support reactions.

    For the following design, add-on modules are available which account for the specific requirements of materials and codes. Due to this modular conception of the software, a package can be assembled that is tailored to individual demands.

    Name: DLUBAL COMPOSITE-BEAM Version: (64bit) 8.06.1103
    Interface: multilanguage
    OS: Windows XP / Vista / 7even / 8 / 10 Size: 542.7 mb

    527MB
    تعليق

      #3

      Dlubal COMPOSITE-BEAM 8.09.01




      Dlubal COMPOSITE-BEAM 8.09.01 | 569.8 mb


      Dlubal Software has released 8.09.01 version of COMPOSITE-BEAM. This software analyzes continuous composite girders according to Eurocode 4. This add-on module can be used with the RSTAB program or also as an independent module that runs on RSTAB standards.



      The structure and load input in this module is done through clearly laid out masks like those found in RSTAB. When the analysis is started, the static model is generated in RSTAB with all boundary conditions and loads. Consequently, a safe calculation of the internal forces using the ideal cross-section properties is guaranteed. COMPOSITE-BEAM automatically analyzes the resulting internal forces and carries out all relevant verification according to EC 4 and following the standards in EC 2 and EC 3. The results are displayed in the spreadsheet masks. They are sorted by the required analysis standards and thus enable an easy orientation. The user`s control over the input as well as the interpretation of the results is facilitated through 3D visualization. All graphics can be edited and transferred to the Printout Report.

      Dlubal COMPOSITE-BEAM 8.09.01

      About Dlubal Software

      Since its beginnings in 1987, the Dlubal company has been involved in the development of user-friendly and powerful software for structural and dynamic analysis. With RSTAB and RFEM Dlubal offers programs for the ambitious structural engineer that meets the requirements of modern civil engineering and mirrors the current state of art. RSTAB is a 3D framework program, while RFEM represents a 3D Finite Element Analysis (FEA) program. Both are the basis of a modular software system: This basic module calculates internal forces, deformations and support reactions. For the following design, add-on modules are available which account for the specific requirements of materials and codes. Due to this modular conception of the software, a package can be assembled that is tailored to individual demands.



      Product: Dlubal COMPOSITE-BEAM

      Version: 8.09.01

      Supported Architectures: x64

      Language: multilanguage

      System Requirements: PC

      Supported Operating Systems: Windows 7even / 8.x / 10

      Size: 569.8 mb


      Note: The program is based on bidirectional communication between RSTAB and the add‑on modules. However, an RSTAB license is not required for using COMPOSITE‑BEAM (stand‑alone operation is possible).



      553MB
      تعليق

        #4
        Dlubal COMPOSITE-BEAM v8.17.02

        The program is based on bidirectional communication between RSTAB and the add‑on modules. However, an RSTAB license is not required for using COMPOSITE‑BEAM (stand‑alone operation is possible)

        611MB
        تعليق

          #5
          شكرا اخي الكريم
          تعليق

            #6
            تسلم ايدك ابو محمد


            تحياتي
            تعليق

              #7

              بارك الله فيك أخي
              جزيل الشكر والامتنان
              تعليق
              Random
              Collapse

              Working...
              X