PCSCHEMATIC Automation 20.0.3.54
برنامج لرسم الدوائر الكهربائية. في المنشآت والهياكل المعقدة مع رسم الخرائط المناسبة واستراتيجية الأسلاك وتوزيع الكهرباء في هذا الموقع هو شرط ضروري وهام. بالنسبة لمنزل صغير ، ربما يمكن رسم خريطة الأسلاك بأكملها على قطعة من الورق ، لكن الأمر ليس كذلك في المجمعات والهياكل الصناعية. في هذه الحالات ، غالبًا ما يتم استخدام برامج الكمبيوتر لإنشاء خطط الأسلاك.
PCSCHEMATIC Automation is a software for drawing electrical circuits. In complex installations and structures with a proper mapping and strategy for wiring and distribution of electricity at that location is a necessary and necessary requirement. For a small house, perhaps the whole map of the wiring can be drawn on a piece of paper, but it is not the case in industrial complexes and structures. In these situations, computer software is often used to generate wiring plans.
The program is one of the most desirable software in this field, and even offers capabilities beyond the usual requirements of electrical engineers. With this program you can carry out various types of automation, wiring, installation, pneumatic and hydraulic projects. PCSCHEMATIC has been working on designing this product to make it easier for professionals who have just been planning to do wiring projects. Unlike other competitors, this program has a simple environment and users can easily use the toolbar to pull all the elements on the screen and connect with each other.
PCSCHEMATIC has a large database of electrical and mechanical parts that will enable the implementation of various electrical drawing projects. The wiring lines are automatically aligned and easily connected to the elements. It is possible to input and output DWG format to this software. This drawing application uses the concept of layers, and you can do separate work in each layer. The result of all layers is combined and the final output is generated. The program automatically calculates the list of required components and the wires' size, and provides you with regular reports.
required system
PCSCHEMATIC Automation System requirements
PC | SCHEMATIC Automation is an autonomous system that runs on Windows XP / Vista (32/64 bit) and requires P4 processor or higher, 512 MB RAM (recommended 1024MB RAM) and 200 MB of free hard disk space. - See more at:
451MB
http://s15.alxa.net/001/009/PC_SCHEM...v20.0.3.54.rar
برنامج لرسم الدوائر الكهربائية. في المنشآت والهياكل المعقدة مع رسم الخرائط المناسبة واستراتيجية الأسلاك وتوزيع الكهرباء في هذا الموقع هو شرط ضروري وهام. بالنسبة لمنزل صغير ، ربما يمكن رسم خريطة الأسلاك بأكملها على قطعة من الورق ، لكن الأمر ليس كذلك في المجمعات والهياكل الصناعية. في هذه الحالات ، غالبًا ما يتم استخدام برامج الكمبيوتر لإنشاء خطط الأسلاك.
PCSCHEMATIC Automation is a software for drawing electrical circuits. In complex installations and structures with a proper mapping and strategy for wiring and distribution of electricity at that location is a necessary and necessary requirement. For a small house, perhaps the whole map of the wiring can be drawn on a piece of paper, but it is not the case in industrial complexes and structures. In these situations, computer software is often used to generate wiring plans.
The program is one of the most desirable software in this field, and even offers capabilities beyond the usual requirements of electrical engineers. With this program you can carry out various types of automation, wiring, installation, pneumatic and hydraulic projects. PCSCHEMATIC has been working on designing this product to make it easier for professionals who have just been planning to do wiring projects. Unlike other competitors, this program has a simple environment and users can easily use the toolbar to pull all the elements on the screen and connect with each other.
PCSCHEMATIC has a large database of electrical and mechanical parts that will enable the implementation of various electrical drawing projects. The wiring lines are automatically aligned and easily connected to the elements. It is possible to input and output DWG format to this software. This drawing application uses the concept of layers, and you can do separate work in each layer. The result of all layers is combined and the final output is generated. The program automatically calculates the list of required components and the wires' size, and provides you with regular reports.
required system
PCSCHEMATIC Automation System requirements
PC | SCHEMATIC Automation is an autonomous system that runs on Windows XP / Vista (32/64 bit) and requires P4 processor or higher, 512 MB RAM (recommended 1024MB RAM) and 200 MB of free hard disk space. - See more at:
451MB
http://s15.alxa.net/001/009/PC_SCHEM...v20.0.3.54.rar
