Repair partition table and boot sector

Icon4 Repair partition table and boot sector






Repair partition table sector



إخوتي أعضاء وزوار منتدى داماس الكرام

تحية طيبة وبعد،،،
أسعد الله أوقاتكم أينما كنتم وبارك فيكم




Repair partition table sector





طريقة اصلاح الهارد في حالة عدم ظهوره


الشرح تم بالنسخه الاقدم من البرنامج






الخطوه الاوله




قم بتحمل برنامج GSmartControl



Repair partition table sector


https://kent.dl.sourceforge.net/project/gsmartcontrol/1.0.2/gsmartcontrol-1.0.2-win32.exe








Unzip it and run gsmartcontrol.exe
Double-click your drive and click the ATTRIBUTES tab


.
  • If ID #05 Reallocated Sectors Count is listed and has a RAW VALUE greater than 5 then there is physical damage in the form of bad sectors.
  • If ID #191 G-sense Error Rate is listed and has a RAW VALUE greater than 0 then that means the drive has been dropped or bumped hard.
  • If ID #197 Current Pending Sector Count is listed and has a RAW VALUE greater than 5 then there is physical damage in the form of bad sectors.
Next, click on the PERFORM TESTS tab and execute the SHORT TEST. If it does not pass the test then there is physical damage.




Repair partition table and boot sector



مملاحظه



This can take many hours, even days, to run on large hard drives bigger than 500GB




Be aware that this can take a very long time to run. You can do other stuff on your computer while it runs as long as it is not something that tries to use the bad drive.








If there is no indication of physical damage then you can continue. In order to repair the most common problems that cause an external disk to suddenly become RAW we will use TestDisk.



الخطوه الثانيه


ملاحظه





العمليه قد تستغرق ساعات للاصلاح
يمكنك استعمال

الجهاز بشكل طبيعي










Download Testdisk

Repair partition table sector


http://www.cgsecurity.org/wiki/TestDisk_Download


او



مباشر


https://www.cgsecurity.org/testdisk-7.1-WIP.win.zip









and run testdisk_win.exe
TestDisk is a console application so you have to use your keyboard to interact with it instead of your mouse.
Choose CREATE and hit enter




Repair partition table sector


Make sure that your external disk is highlighted




Choose Proceed and hit enter
Repair partition table sector




Select Intel and hit enter (there is a slight chance that the partition is EFI GPT if the drive is 2TB or greater in size and at the bottom of this screen it says that Hint: EFI GPT was detected. If that is the case, select EFI GPT instead and try that.)

Repair partition table sector


Select Analyse and hit enter



Repair partition table sector


The partition data looks incorrect (an explanation of why is beyond the scope of this article)



Select Quick Search and hit enter
Repair partition table sector




Say ‘Y‘ if it asks if the disk was made in Vista/Win7 (even if it was made in XP say ‘yes’)


Otherwise select N

Repair partition table sector




Now the Quick Search will run
Repair partition table sector




When the Quick Search completes, we see one partition (if you only see the option to CONTINUE at the bottom of the screen press ENTER one time to continue to the screen that you need to be at)


.
Repair partition table sector
Lets look at the data on that partition press
P
and you should see a list of files/folders in the partition



.




Repair partition table sector


Hmmm… This looks like a bunch of diagnostic tools but not our missing data. We’ll need to look further. Press
Q
to go back a screen and then press
enter
IF YOU SEE ALL YOUR FILES THEN SKIP THE DEEPER SEARCH AND GO TO THE STEP DESCRIBING SELECTING WRITE

To get to this screen, select DEEPER SEARCH and press enter.




Repair partition table sector




Naturally, the Deeper Search takes longer than the Quick Search




Repair partition table sector




When the Deeper Search completes we now see two partitions. The one we saw after the quick search and another one.




Repair partition table sector
Select the new partition and press
P
to see the files/folders and now we see the data we want to make visible again.





Repair partition table sector
Press
Q
to go back a screen and then press enter to get to this screen.
Select WRITE and press enter in order to write our new partition table to the drive.
DO NOT WRITE A NEW PARTITION TABLE IF YOU DID NOT SEE YOUR FILES/FOLDERS That means the proper partition table was not found and you will have to try a different technique to recover your data


.




Repair partition table sector
Press Y to confirm that you want to write the new partition table.




Repair partition table sector




As I mentioned at the start of this repair, this disk also has corruption in the boot sector of the partition that we are trying to make visible again. When this is the case TestDisk will stop at this point and ask you to fix it before it finishes writing the new partition table. If the backup boot sector is good (as in this case) simply choose BACKUP BS and press enter. In the event that the backup boot sector is also bad then choose REBUILD BS.




Repair partition table sector
Press Y to confirm the boot sector repair




Repair partition table sector
Then choose QUIT and press enter




Repair partition table sector
Regardless of whether a boot sector repair is required or not, you will end up at this screen where all you can do is press enter. Then hit Q until you are out of TestDisk.


Repair partition table sector




Now reboot the computer to see if the drive is now visible.



لدعم قناة وسام الحمد على اليوتيوب

المواضيع المشابهه
مشكله بخصوصPTDD Partition Table Doctor 3.5
هل يوجد برنامج Repair Bad Sector بصيغه ima
برنامج لاصلاح الهاردسك من البادسكتور Repair Harddisk Bad Sector Pro 2009
مشكله partition table error #116 found
نظام ال Partition Table الافضل لنظام اكس بى

المتألق فى سماء الصرح السيد / Ghost rider ايها العملاق الرائع الذى لايدخر وسعا فى الطواف على الشبكة لجلب كل ماهو نافع ومفيد ليثرى به صرحنا وعقولنا كعادة سيادتك دائما اكثر من متفوق على نفسك وعلى الاخرين ودائما تتحفنا بكل مفيد ..بارك الله فيك وزادك سعة فى العلم والرزق وربنا مايحرمناش من ابداعاتك المميزة والف شكر على الابداع الجديد..كل التقدير والاحترام

بالعربى ..يا أهل العربى
بس شكرااا على العموم

شكرا اخى الغالى

أدوات الموضوع