Sagem Fast 800 in Ubuntu 10.10
Peace be upon you
Sorry for writing in english 'cos i don't have the possiblity to write arabic righ now.
all i'm asking is a solution to use Sagem f@st 800 modem under ubuntu 10.10.
i've been using the same modem in earlier releases of ubuntu without any problem, from the time i upgraded to 10.10 i used WIFI connection , today i were in a situation in wich a hardly needed to use the modem to get internet connection, i tried all the possible solution from ubuntu community but no one of them goes okey with me :(

hope we can together find a solution

my best regards




لدعم قناة وسام الحمد على اليوتيوب

Believe and act as if it were impossible to fail
hi
1- how did you upgrade to 10.10 ?

2- is problem that the connection is time-out ? or no driver at all ?

3- did you try to install " egleUSB "
Link

thanx
انا لست عربي
لذا اعذرني اذا لم افهمك من البداية
شاركنا بتصميم سطح مكتبك


++ Off-Line ++
hi :)
1 : i did a fresh intallation
2 : the modem is not supported, in every new releases comes new tricks to make it work properly, in ubuntu changelog they said that the modem is supported since 10.10 and we no longer need to worry, but none of methods on web works with me
3 : yeah sure, this was my first shot

thanx
اقتباس :-
yeah sure, this was my first shot
weird !

ok
** open terminal and paste the output of
كود:
sudo lsusb
** and i prefer to paste the output of above tuto

thanx
now i'm on windows so i can't try it (i'm using dual boot for some Designing and gaming purposes) and im using it today to get connected since this is not possible on ubuntu :)

could you please check this link :
Link

اقتباس :-
Eagle drivers are now natively included (see Link). Therefore you don't need to install them anymore : go directly to the "Configuring The Connection" section of this page.
Beside i should mention that there is a conflict in pppoa/pppoe

thanx :)
اقتباس :-
could you please check this link :
so its more easier , just configure it


اقتباس :-
Beside i should mention that there is a conflict in pppoa/pppoe
actually it is not conflict , due to PPPOE is part of PPPOA

اقتباس :-
now i'm on windows so i can't try it
ok , until you dual it , past the outputs

thanx
التعديل الأخير تم بواسطة اذكرالله ; 14-01-2011 الساعة 04:57 AM سبب آخر : oops my bad " PPPOAE"
Hi again

this is what i've got once i runned the command above :

Bus 002 Device 007: ID 0c45:6450 Microdia
Bus 002 Device 006: ID 03f0:3307 Hewlett-Packard
Bus 002 Device 005: ID 14cd:6116 Super Top
Bus 002 Device 004: ID 059b:0475 Iomega Corp.
Bus 002 Device 003: ID 1110:9041 Analog Devices Canada, Ltd (Allied Telesyn)
Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

as you can see the modem is not detected :(

thanx


اقتباس :-
Bus 002 Device 003: ID 1110:9041 Analog Devices Canada, Ltd (Allied Telesyn)
what is that ?

thanx
اقتباس : المشاركة الأصلية كتبت بواسطة اذكرالله
what is that ?

thanx
it's the ADSL-USB Modem , i didn't know that. i just made a web search about it

thanx
اقتباس :-
it's the ADSL-USB Modem , i didn't know that. i just made a web search about it
now
is it worked ?

thanx

Sagem Fast 800 in Ubuntu 10.10

أدوات الموضوع