أستغفر الله العظيم ... سبحان الله وبحمده



العودة   منتديات داماس > البوابه الهندسية > شيتات اكسل - Excel Spreadsheets


مواضيع مميزة  


آخر عشرة مواضيع المواضيع النشطة


23-06-2014, 06:56 PM
سعد الدين متصل
المسؤول الفني
رقم العضوية: 3
تاريخ التسجيل: Mar 2003
الإقامة: Türkiye
المشاركات: 39,364
إعجاب: 8,760
تلقى 15,567 إعجاب على 5,204 مشاركة
تلقى دعوات الى: 4885 موضوع
    #1  

Structural Design of Precast Concrete Elements


Structural Design Precast Concrete Elements

Engineering Spreadsheet Software

Structural Design of Precast Concrete Elements


Structural Design Precast Concrete Elements


Description of the Project
The building is a 12-storey office block in a mix commercial development comprising carparks, shopping malls and service apartments. A typical floor of the building measuring 24 m x 72 m with 8 m building grids in both directions is shown in Figure 4.1. The design floor-to-floor height is 3.6 m. Staircases, lift cores and other building services such as toilets, AHU, M&E risers are located at each end of the floor which are to be cast in-situ.

Structural System
Precast construction is adopted from the second storey upwards to take advantage of the regular building grids and simple structural layout. The areas from grids A to C and from J to K are, however, cast in-situ due to drops, floor openings and water-tightness considerations. Beside acting as load bearing walls, staircase wells and lift cores also function as stabilising cores for the superstructure. The walls are 300 mm thick, cast in-situ and are tied monolithically at every floor. The precast components consist of hollow core slabs, beams, columns and staircase flights.
a. Hollow core slabs
The design of hollow core slabs (215 mm thick) is based on class 2 prestressed concrete structure with minimum 2 hours fire rating. The hollow core slabs are cast with C50 concrete. Each unit (1.2 m nominal width) is designed as simply supported with nominal100 mm seati at the support. Resultant stresses are checked at serviceability and at prestress transfer. Design of the slab is carried out by the specialist supplier.
b. Precast beams
535 mm deep full precast beams are used in the office area. The beams, which are unpropped during construction, are seated directly onto column corbels and are designed as simply supported structures at the final stage. To limit cracking of the topping concrete at the supports, site placed reinforcement is provided as shown in the typical details in Figure 4.2.
c. Precast columns
The columns are 500 mm x 700 mm and are cast 2-storey in height with base plate connection at every alternate floor. They are designed as pin-ended at the ultimate limit state. The base plate connection is designed with moment capacity to enable the columns to behave as a 2-storey high cantilever. This is to facilitate floor installation works which are to be carried out two floors in advance of a finally tied floor at any one time during the construction of the office block. The use of base plate connection will eliminate heavy column props and result in a safer and neater construction site. A nominal 50 mm gap is detailed in the design of the column-to-column connection in order to provide sufficient tolerances for the insertion of in-situ reinforcement at the beam support regions. The gap will be filled with C50 non-shrink grout. Each column is cast with reinforced concrete corbels in the direction of the precast beams. The corbels are provided with T25 dowel bars which are used to prevent toppling of the precast beams when the hollow core slabs are laid. The depth of the corbel is designed to be concealed visually within the final ceiling space. At the final state, all columns are considered braced in both directions.
d. Floor diaphragm action and structural integrity
All precast components are bound by a 65 mm thick concrete topping which is reinforced with a layer of steel fabric. The steel fabric serves as structural floor ties in order to satisfy the integrity ties requirement under the building robustness design considerations. The final floor structure will behave as a rigid diaphragm which transmits horizontal loads to the stabilising cores at each end of the floor.

Full design calculation of above structural elements can be downloaded from below link.



Download


http://mediafire.com/download/01/PRECAST.STRUCT...GN.updated.rar





المواضيع المشابهه
الموضوع كاتب الموضوع المنتدى مشاركات آخر مشاركة
Structural Precast Concrete Handbook 2nd Edition سعد الدين كتب هندسة مدني, معماري, ميكانيك وغيرهم 3 27-09-2016 08:05 PM
Design of Composite Beams using Precast Concrete Slabs سعد الدين كتب هندسة مدني, معماري, ميكانيك وغيرهم 2 04-05-2016 06:24 AM
Structural Connections Precast Concrete Building سعد الدين كتب هندسة مدني, معماري, ميكانيك وغيرهم 3 03-05-2016 02:01 PM
Training - Precast Concrete Design Manual سعد الدين كتب هندسة مدني, معماري, ميكانيك وغيرهم 5 12-09-2014 11:51 PM
FIB-41 Treatment of Imperfections in Precast Structural Elements سعد الدين كتب هندسة مدني, معماري, ميكانيك وغيرهم 2 31-08-2014 10:54 PM

25-06-2014, 12:30 AM
raedms غير متصل
VIP
رقم العضوية: 81535
تاريخ التسجيل: May 2007
المشاركات: 23,915
إعجاب: 618
تلقى 4,088 إعجاب على 721 مشاركة
تلقى دعوات الى: 1313 موضوع
    #3  
جزاك الله كل خير


سبحان الله وبحمده سبحان الله العظيم


03-05-2016, 01:51 PM
alaahassan84 غير متصل
عضو جديد
رقم العضوية: 775624
تاريخ التسجيل: May 2016
المشاركات: 5
إعجاب: 0
تلقى 0 إعجاب على 0 مشاركة
تلقى دعوات الى: 0 موضوع
    #5  
جزاك الله كل خير

20-08-2016, 06:51 PM
juvierj غير متصل
عضو جديد
رقم العضوية: 691611
تاريخ التسجيل: Nov 2015
المشاركات: 1
إعجاب: 1
تلقى إعجاب 1 على مشاركة واحدة
تلقى دعوات الى: 0 موضوع
    #7  
thank you so much

04-10-2016, 02:21 PM
mohammeddia غير متصل
عضو فعال
رقم العضوية: 837706
تاريخ التسجيل: Sep 2016
المشاركات: 87
إعجاب: 0
تلقى 3 إعجاب على 3 مشاركة
تلقى دعوات الى: 0 موضوع
    #8  
عاشت ايدك اخوية


28-12-2016, 10:38 AM
khdhr غير متصل
عضو جديد
رقم العضوية: 120103
تاريخ التسجيل: Apr 2008
المشاركات: 10
إعجاب: 1
تلقى 0 إعجاب على 0 مشاركة
تلقى دعوات الى: 0 موضوع
    #9  
thanks alot

28-12-2016, 10:39 AM
khdhr غير متصل
عضو جديد
رقم العضوية: 120103
تاريخ التسجيل: Apr 2008
المشاركات: 10
إعجاب: 1
تلقى 0 إعجاب على 0 مشاركة
تلقى دعوات الى: 0 موضوع
    #10  
اخي لماذا لايتم التحميل علما باني ادخل الاسم والباسوورد الخاصه بي

13-03-2017, 08:28 PM
Amer_25 غير متصل
عضو جديد
رقم العضوية: 878121
تاريخ التسجيل: Dec 2016
المشاركات: 8
إعجاب: 0
تلقى 0 إعجاب على 0 مشاركة
تلقى دعوات الى: 0 موضوع
    #11  
شكرا"

18-04-2017, 08:20 AM
essam awad11 غير متصل
عضو جديد
رقم العضوية: 289739
تاريخ التسجيل: Jun 2009
المشاركات: 4
إعجاب: 0
تلقى 0 إعجاب على 0 مشاركة
تلقى دعوات الى: 0 موضوع
    #12  
بارك الله لك .

 


Structural Design of Precast Concrete Elements

English

Powered by vBulletin® Version
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
The owner and operator of the site is not responsible for the availability of, or any content provided.
Topics that are written in the site reflect the opinion of the author.
جميع ما يُطرح من مواضيع ومشاركات تعبر عن رأي كاتبها ولا تعبر عن رأي مالك الموقع أو الإدارة بأي حال من الأحوال.