|آخر عشرة مواضيع||المواضيع النشطة|
Archicad 12 Software Collection (2008-2009)
Archicad 12 Software Collection (2008-2009)
Archicad 12 Software Collection - This collection of programs, plug-ins and video based on the Russian version of ArchiCAD 12, which is the most comprehensive and flexible tool for information modeling buildings (Building Information Modeling).
Intel Pentium 4
1 GB of RAM is minimum, 2 GB or more - is recommended
Hard disk: 1 GB for full installation. 2 GB to work
Display: 1024x768 minimum, 1280x1024 or higher recommended
Video: Open GL and DirectX 9 compatible card with 256 MB or more memory.
ArchiCAD 12, without a doubt, strengthen the leadership program as the most complete and flexible tools for information modeling buildings (Building Information Modeling - BIM). When you create a new version of the developers, the focus has traditionally focused on three areas: speed, improved modeling tools, and improve the quality of documentation.
Support for multiprocessor systems - the use of multiprocessor computers with ArchiCAD 12 will significantly improve performance by increasing the speed of navigation (for both 2D-documented, as well as 3D-window) and the generation of species of 3D-models (for example, cuts to miscalculation shadows). And, of course, increases the overall speed of the program, while at the same time - the comfort and convenience.
Photos and shading - the new technology incorporated into the program, significantly increase the speed of working with raster images and vast fields shtrihovok as in the design, and in the generation and layout drawings on the sheets. In addition, the increased rate of generation of documentation in a PDF.
Hinged Wall - came in ArchiCAD 12 wall mounted tool opens new possibilities for designing and documenting complex frame structures. It is based on the latest technology ArchiCAD - System Technology, which will be used in the design of composite systems. The essence of this technology is that engineering design is presented in a hierarchical structure (in this case - cutting design patterns, components and additional accessories), and the user can easily monitor and change any part of the wall, detail and develop the entire project as a whole.
Box - allows users to work with slozhnokompozitnymi structures of walls and ceilings, and quickly display only the carrier portion of the design.
Overview of the major innovations:
Suspended facade systems. Options
Suspended facade systems. Creating and editing
Suspended facade systems. Options
Suspended facade systems. Creating and editing
Suspended facade systems. Connect with walls
Partial mapping of multilayer structures
Changes in StairMaker
Offset / Alignment / uniform distribution of elements
Changes in dialogs /
Other improvements - Now users can select any objects in 2D-or 3D-form, then move, align and distribute them in a space the same way as it is in popular office applications (eg, extend the trees along the walking track, to move through arrows on the keyboard kitchen table a few centimeters to the left). This is convenient, fast and effectively!
ArchiCAD 12 build 2325 RUS
Hotfix 3 (2420)
Hotfix 4 (2523)
Hotfix 5 (2675)
Tabletka to Build 2325, 2420, 2523, 2675.
ADDONS: 3DStudio In, Accessories, Library Accessories, Construction Simulation, EDMIFC 2x2, Mesh to Roof, Interior Wizard, Intersections in Combos, PolyCount, Check Duplicates, Profiler, RAL Colors, Objective 2.25, Zonematic12_Win, MEP Modeler for ArchiCAD 12, ArchiCAD Connection Plug-In, Mediterran12, gbXML Shipping.apx.
Cadimagetools Suites collection 12.4
A detailed description of the installation:
1) Run AC12-RUS.exe folder AC 12 RUS. Install a commercial version. All default.
2) After the installation (set Arcicad, WIBU, QuickTime, java) overrides the comp.
3) Set the update folder AC 12 RUS 2325 \ Update run AC12-2420.exe, then install the AC12-2523.exe. After each update, overloading the machine. Who needs a MEP next update does not take place and кряк number 2523, who do not need a set AC12-2675-HOTFIX5.exe. If asked to overload the machine after the updates - overloading. (MEP does not work with the update of 2675 - how to tame it is not known yet).
4) From the folder AC 12 RUS \ Crack for Archicad take file archicad.12.build.2675.update-patch.by.xZtexe and throws in the C: \ Program Files \ Graphisoft \ ArchiCAD 12. Run it and patch. (Updates are spread as кряки for each of the updates. If someone does not become either an update on the previous version, and to cure any version. Main properly applied.)
5) Open the folder AC 12 RUS \ Addons \ Cadimage and run Cadimage_Tools_Installer.exe. Be sure to check the installation path. They should all be in a folder Archicad 12.
6) Open the folder AC 12 RUS \ Addons \ Cadimage \ Crack run file cadimage.tools.12.x.universal.patch.by.xztexe, click on a patch
find the file in the directory C: \ Program Files \ Graphisoft \ ArchiCAD 12 \ Add-Ons \ CadimageTools - "open". Wait until the patch established. Close patch.
7) Copy the folder from the list AC 12 RUS \ Addons \ Addons for Archicad in the folder C: \ Program Files \ Graphisoft \ ArchiCAD 12 \ Extensions ArchiCAD. Copy the folder gbXMLShippingWin12, from the list of AC 12 RUS \ Addons \ GBXML, AC 12 RUS \ Addons \ Objective 2.25 of the catalog AC 12 RUS \ Addons \ Objective 2.25, Zonematic12_Win from the list AC 12 RUS \ Addons in C: \ Program Files \ Graphisoft \ ArchiCAD 12 \ Extensions ArchiCAD.
8) Run the Setup.exe file in the folder AC 12 RUS \ Addons \ MEP and install the first MEP Modeler for ArchiCAD 12, then ArchiCAD Connection Plug-In. Connection Plug-In may not be on the flight characteristics of Archicad, it is not affected. (But if it becomes available in the car Autocad Mep)
9) Open the folder \ AC 12 RUS \ Addons \ MEP \ crk and copy files graphisoft.mep.modeler.12.universal.patch.by.xZtexe and MEP Modeler.apx in C: \ Program Files \ Graphisoft \ ArchiCAD 12 \ Extensions ArchiCAD \ MEP Modeler. On the issue of replacing - the affirmative. Starting graphisoft.mep.modeler.12.universal.patch.by.xZtexe file and click patch.
10) Open the folder \ AC 12 RUS \ Addons \ Objective 2.25 \ crk and copy OBJECTiVE.apx in C: \ Program Files \ Graphisoft \ ArchiCAD 12 \ Extensions ArchiCAD \ OBJECTiVEWinAC12 \ OBJECTiVE, but gbXML Shipping.apx folder AC 12 RUS \ Addons \ GBXML \ crk in C: \ Program Files \ Graphisoft \ ArchiCAD 12 \ Extensions ArchiCAD \ gbXMLShippingWin12. On the issue of replacing - the affirmative.
11) Run the file in the folder Registration.reg AC 12 RUS \ Addons \ GBXML \ crk. Add data to the reest - yes. Run the file in the folder Registration.reg AC 12 RUS \ Addons \ Objective 2.25 \ crk \ crk. Add data to the reest - yes.
12) Run the file in the folder Mediterran12_installer_2008.exe AC 12 RUS 2325 \ Addons Installer and specify the folder C: \ Program Files \ Graphisoft \ ArchiCAD 12. Further, more .... OK!
13) Copy the contents of the folder AC 12 RUS \ Addons \ Cigraf in C: \ Program Files \ Graphisoft \ ArchiCAD 12 \ Extensions ArchiCAD. Then take turns opening the folder and launch the file cigraph.bundle.12.edu.23.02.09.patch.by.xZtexe. Click Patch and set on a file with a. Apx. Develops a patch - exit. And so in each folder. Files cigraph.bundle.12.edu.23.02.09.patch.by.xZtexe after being subjected to possible poudalyat. They are the same everywhere, and I throw them specifically to each folder that it matters less and explanations.
14) Open the folder AC 12 RUS \ Addons \ ArchiGlazing and run the file Setup.exe. After installation copy the file ArchiGlazing.apx from the same folder in C: \ Program Files \ Graphisoft \ ArchiCAD 12 \ Add-Ons \ Extras - replace.
15) Open the folder AC 12 RUS \ VBExplorer_106690_AC12 \ Install and run the file Setup.exe. After installation, open the folder AC 12 RUS \ VBExplorer_106690_AC12 \ ENGiNE and copy VBE_LicenseManager.exe and VBE.exe in C: \ Program Files \ Graphisoft \ Virtual Building Explorer. File Engine.zzz copy C: \ Program Files \ Graphisoft \ Virtual Building Explorer \ System. File VirtualBuildingExplorer.apx copy C: \ Program Files \ Graphisoft \ ArchiCAD 12 \ Extensions ArchiCAD \ Virtual Building Export (if this folder is not there a way that - ArchiCAD 12 \ Add-Ons \ Virtual Building Export \).
16) Open the folder \ AC 12 RUS \ Addons folder and copy in the Bibl ArchiCAD 12 \ ArchiCAD Library 12. (not yet understand that the beast)
17) Open the folder AC 12 RUS \ Addons folder and copy Doublecheck12_Win in C: \ Program Files \ Graphisoft \ ArchiCAD 12 \ Extensions ArchiCAD \.
18) Run LIB12-RUS-Win.exe folder AC 12 RUS. This update of library items.
19) Run the Archicad, create a new project. Then walk along the path parameters / Manager extensions / edit the list of available extensions / Find extension. Open the folder C: \ Program Files \ Graphisoft \ ArchiCAD 12 \ Add-Ons \ CadimageTools and select all of it to expand and "open." Truth have to restart the project. Now in the top menu bar will be available tools Cadimage.
Do not let us update addons from Cigraf - instantly nakroetsya and ask for a license. If you do not reinstall Archicad, but simply update - be sure to replace the Addons folder AC 12 RUS \ Addons \ Addons for Archicad in the folder C: \ Program Files \ Graphisoft \ ArchiCAD 12 \ Extensions ArchiCAD. The reason - with the release of a new Hotfix - updated and expanded.
- Run the project and settings floors. Describes the creation and preservation of the project, setting up floors.
- Installation of the design grid. We consider the setting and paste in the project design grid.
- Design of foundation. We show the design foundation cafe.
- Designing the basement floors. We consider how to build a foundation before closing overlapping.
- Designing walls of the ground floor. We show how to design the walls of the ground floor.
- Design of the first-floor ceilings. Demonstrate how to design the floor.
- Design of the crack under the staircase. We consider how to create openings for stairs from 1 to 2 storey.
- Design the second floor. We show how to design a second floor by copying and pasting the first floor.
- Design of the first-floor windows. We consider how to create stained glass windows in the front and side facades of the first floor of the cafe.
- Completion of the first-floor windows. Demonstrate how to design the three windows on the rear facade of the first floor of the cafe.
- Construction of arch stained glass. We show how to arched stained-glass window on the second floor.
- Completion of the second-floor windows. Let's learn how to design the six windows on the second floor.
- Construction of front doors. We show how to set up two front doors to enter the cafe.
- Construction of a service door. Let's learn how to build a service door in the cafe.
- Construction of internal doors. We show the construction of the doors inside the building the cafe.
- Building a porch. Demonstrate how to comply with a porch to the entrance to the cafe.
- Building a ladder platforms. We consider how to build staircases on first and second floors.
- Creation of a new staircase and its setting. We show how to create a new staircase and set its parameters.
- Construction of stairs. We consider the construction of the stairs first and second floors. In addition, we show how to view the work in three-dimensional form.
- Construction of the roof. Demonstrate how to configure the tool Roof (Roof), and how to create a roof.
- Coverage of the roof tiles. We show how to create tiles and assign the same material the roof.
تحميل احدث اصدار من هنا
برنامج (ArchiCAD 20 build 3008 (x64 لمجال التصميم المعماري و التصميم الهندسي
- Any DVD Cloner Platinum v1.0.7
- Kaspersky Rescue Boot Disk 10.0.23.29
- BitDefender Internet Security 2011 22.214.171.1242
- AnyBizSoft PDF to PowerPoint Converter 126.96.36.199
- Aimersoft DVD Ripper 2.0 intel Only
- Active Table Editor v188.8.131.52
- Xceed Ultimate Suite v10.4.10417
- SynaptiCAD Product Suite v15.04c
- Avira AntiVir Rescue System Boot CD
- Sonne DVD Burner 184.108.40.2061
|الموضوع||كاتب الموضوع||المنتدى||مشاركات||آخر مشاركة|
|Autodesk Revit Architecture Software Collection 2009||VALANDINO||التطبيقات الهندسية||0||28-09-2009 01:56 PM|
|Adobe Audition Software Collection 2006-2009||New star||برامج تحرير الفيديو وتحويل الصيغ وبرامج الصوتيات والملتيميديا||3||30-08-2009 10:33 AM|
|Ashampoo Burning Software Collection - Updated 6.08.2009||ahmedelzayat||برامج نسخ وحرق الاسطوانات CD/DVD Burning, Ripping, Copying||5||15-08-2009 01:42 AM|
|SlySoft Software Collection 2009||hatem20||برامج||10||16-04-2009 11:29 PM|
|جديد ال Best PDF Software Collection 2008||Anouar2030||برامج||3||26-02-2009 08:20 PM|
جزاك الله خيرا
اللـــــه يـعـطـيــــــــك الـعـافـيـــــــــة
ومـشـكـــــــور عـلــــــى مـــــرورك الـجـمـيــــــل