أستغفر الله العظيم ,, اللهم لك الحمد



العودة   منتديات داماس > البوابه الهندسية > التطبيقات الهندسية


مواضيع مميزة  


آخر عشرة مواضيع المواضيع النشطة


06-06-2009, 04:41 PM
cace_01 غير متصل
عضو فعال
رقم العضوية: 85959
تاريخ التسجيل: Jun 2007
المشاركات: 110
إعجاب: 0
تلقى 30 إعجاب على 17 مشاركة
تلقى دعوات الى: 1 موضوع
مواضيع لم تعجبه: 0
تلقى 0 عدم اعجاب على 0 مشاركة
    #1  

SCADOffice 11.3 [Ru, Eng] dated 26.05.2009


SCADOffice dated 26.05.2009

Originally Posted By : dam_xoa_nic_ong_ha -- Date : 06 Jun 2009 03:31 --

SCAD Office - the new generation system, developed by engineers for engineers and implemented a team of experienced programmers. The system includes a set of high-performance computing version of SCAD, as well as a number of designing and supporting programs that address the issues of calculation and design of steel and reinforced concrete structures. The system is constantly evolving, improving the user interface and computational capabilities include designing new components.

SCAD Office includes the following programs:
* SCAD 11.1-computer complex for strength analysis of structures
finite element method
* Forum 1.7-forming larger models (preprocessor)
* WEST 3.5.3 - Calculation of loads on SNiP "Pressures and Impact"
* 5.3 Cross-bed calculation of coefficients of buildings and structures on an elastic
a
* Crystal-4.1.11 Calculation of steel structures
* Arbat 5.1 Selection of fixtures and examination of reinforced concrete
structures
* Fireplace 2.7.1, the calculation of the stone structures and armokamennyh
Decor * 1.3-calculation of wooden constructions
* 1.1.3 Request-account of the grounds and foundations
* 1.1-analysis of slope stability of slopes and the slopes
* Constructor sections of 2.3-generation and calculation of geometric
characteristics of the cross sections of rolled profiles and sheets
* Consul 3.1-build arbitrary cross sections and calculation of their geometric
characteristics based on the theory of continuous-rod
* Tonus 2.3 - Construction of arbitrary cross sections and calculation of their geometric
characteristics based on the theory of thin rods
* Sesame 2.1 - Search for the equivalent cross-sections
* Monolith 3.0 - designing monolithic ribbed ceilings
* Kometa 2.9 - Calculation and design of steel structures knots
* Bush 1.3.1 - theoretical calculation and designer directory
* Cocoon 3.1.1 - a handbook on stress concentration factors and
stress intensity factor

New features and fixes:

Published a new version of SCAD Office 11.3, which
offers several new features.

Mode «Installation»

In the computer complex SCAD realized regime «Mounting» and
simulation of building facilities. When a
the ability to install and remove some elements of the system,
installation or removal of ballast cargo, regulation of lengths of elements
changes in the state of relations, etc.
Taken together, realized the possibility of job input data, ie
description of the installation in graphical dialogue. Allowed
use as a cause for modeling sequence
erection of an independent set calculation scheme, and
establishment of the scheme directly in the «Editing».

Efficient high-speed solver

In version 11.3 of computer uses a new set of SCAD
alternative direct solver based on mnogofrontalnogo method. In addition to
high speed compared with the solver version 11.1 it
The possibility of parallel computations on multicore
personal computers.
The efficiency of algorithms allowed for
uniprocessor computers to increase the dimension of the task and
while almost twice as shorten the time to address them.

Library SCAD APII

Library SCAD API (Application Program Interface) represents
a set of methods designed to work with projects
computer complex SCAD. It is designed for users
possessing the skills of programming in C + +, and allows
create their own applications for the computer complex. In
of the library includes several sections: Class CScadAPI, methods
which are used to create and adjust the settlement schemes,
Class CScadResult - to analyze the results of calculation, as well as a number
support structures to deal with different kinds of
Computer data set.

Satellite Program

Version 11.3 continues to develop programs satellites. In addition to
improving the user interface in a number of new
computational capabilities.

CRYSTAL program (analysis of steel structures) expanded
through the inclusion of additional sections that implement the recommendations
SP 53-102-2004 «The general rules of design of steel structures».
In INQUIRY (the analysis of bases and foundations)
realized exports to Program ARBAT (analysis of
reinforced concrete structures) data on the type and amount of cross-section piles, and
also estimated the length and characteristics of heavy concrete with a view
coefficient of working conditions, taking into account the effect of the method
production piling. This allows to test the strength of
material piles, using the regime of Resistance of reinforced concrete sections
ARBAT program.
Program KOMETA (analysis and design of steel hubs
structures), supplemented with new prototypes of hinged bases of the columns of
round pipe and the two rolled channels, which are applied in the
number and in the manufacture of billboards.
The program DECOR (analysis of wooden structures)
enabled arches.




http://uploading.com/files/CS6OXFTT/...part1.rar.html


http://uploading.com/files/MD93FSRM/...part2.rar.html


http://uploading.com/files/FEAJ2KX6/...part3.rar.html

or



http://hotfile.com/dl/5269402/b686fe...part1.rar.html


http://hotfile.com/dl/5269391/7c6e22...part2.rar.html


http://hotfile.com/dl/5269379/04e885...part3.rar.html

or



http://www.megaupload.com/?d=5VJJPYI9


http://www.megaupload.com/?d=EKMCFXL4


http://www.megaupload.com/?d=Y4JTKL1L






المواضيع المشابهه
الموضوع كاتب الموضوع المنتدى مشاركات آخر مشاركة
نسخة ويندوز Ganzo Galaxy 2009 اسطوانة ممتازة ببرامج 2009 ashrafganzo برامج 4 22-09-2009 01:00 AM
IBC 2009, IRC 2009 and IFC 2009 - International Code Council, Inc. robert_sasmita الركن التعليمي الهندسي 4 14-09-2009 11:45 AM
الأن ودع الأوتوكاد مع هذا البرنامج الخارق جدا ZwCAD 2009 Professional 2009.02.27.9377 eng_ismail2006 التطبيقات الهندسية 10 10-06-2009 12:54 PM
جديد اكس بى للالعاب Extreme Seven 2009 DirectX10 for Gamer Edition - SP3 - x86 - Final - May 2009 Ge ابو منصر العمودى برامج 4 19-05-2009 11:12 PM
2009 New Activation Keys .مفاتيح جديدة 30 مفتاح لعام 2009 لkis 8.0 nour_eany برامج الحماية 11 03-04-2009 02:34 PM

06-06-2009, 06:28 PM
structeng غير متصل
عضو فعال
رقم العضوية: 67135
تاريخ التسجيل: Feb 2007
المشاركات: 144
إعجاب: 12
تلقى 8 إعجاب على 4 مشاركة
تلقى دعوات الى: 0 موضوع
مواضيع لم تعجبه: 0
تلقى 0 عدم اعجاب على 0 مشاركة
    #2  
Thank you very much


07-06-2009, 05:40 AM
semo1 غير متصل
مشرف التطبيقات الهندسية
رقم العضوية: 8124
تاريخ التسجيل: Apr 2004
المشاركات: 7,386
إعجاب: 388
تلقى 606 إعجاب على 292 مشاركة
تلقى دعوات الى: 472 موضوع
مواضيع لم تعجبه: 0
تلقى 0 عدم اعجاب على 0 مشاركة
    #3  
this is great


thanks friend


regards;


كُلُّ مَنْ عَلَيْهَا فانٍ . وَيَبْقَى وَجْهُ رَبِّكَ ذُو الْجَلالِ وَالإكْرَامِ
-----------------------
S E M O
-----------------------

 


SCADOffice 11.3 [Ru, Eng] dated 26.05.2009


Powered by vBulletin® Version
Copyright ©2000 - 2016, Jelsoft Enterprises Ltd.
The owner and operator of the site is not responsible for the availability of, or any content provided.
Topics that are written in the site reflect the opinion of the author.
جميع ما يُطرح من مواضيع ومشاركات تعبر عن رأي كاتبها ولا تعبر عن رأي مالك الموقع أو الإدارة بأي حال من الأحوال.