الحالة
موضوع مغلق

ENG.SAMEH

مهندس مدنى استشارى
التسجيل
15/4/09
المشاركات
292
الإعجابات
245
العمر
35
الإقامة
QATAR
#1
Program Overview

WinSEISAB (Windows SEISmic Analysis of Bridges) is a computer program specifically developed for the seismic analysis of bridges. The overall objectives in developing WinSEISAB were to provide the practicing bridge engineer with a usable design tool and a vehicle for implementing the latest seismic design methodologies into the bridge engineering profession.

WinSEISAB contains the Uniform Load (AASHTO Procedure 1), the Single Mode Spectral Analysis (AASHTO Procedure 2) and Multimode, i.e., response spectrum, Spectral Analysis (AASHTO Procedure 3) methods included in the current AASHTO Standard Specifications for Highway Bridges, Division IA [1], which adopted the “Guide Specifications for Seismic Design of Highway Bridges” [10] in 1990. The Guide Specifications are based on the ATC report: “Seismic Design Guidelines for Highway Bridges” [2]. Consequently, the AASHTO response spectra used in WinSEISAB correspond to those that were previously identified as ‘ATC-6.’

WinSEISAB can be used to analyze simply supported or continuous deck girder-type bridges with no practical limitation on the number of spans or the number of columns at a bent. In addition, earthquake restrainer units may be placed between adjacent structural segments. Horizontal alignments composed of a combination of tangent and curved segments are easily described using alignment data taken directly from roadway plans. Connections between the superstructure and the substructure and between adjacent superstructure segments at span hinges can be specified with either a keyword force release or by using bearing elements on a point-by-point basis. The flexibility of the soil and foundations at the abutments and column bottoms is easily included using stiffness coefficients or individual piles grouped into pile footings.

WinSEISAB has generating capabilities that will, with a minimum amount of input data, automatically build a model consistent with the modeling techniques currently being used to conduct dynamic analyses. Seismic loadings in the form of acceleration response spectra are stored within WinSEISAB and may be easily referenced by the user, or a site-specific spectrum can be utilized. WinSEISAB can perform a static analysis in which dead load forces are generated using structure mass, but WinSEISAB does not perform a combination of dead load and seismic forces.






CRACK

http://www.4shared.com/file/114203017/23793ad9/CrackWinSEISAB507.html
 

semo1

semo1

مشرف التطبيقات الهندسية
التسجيل
5/4/04
المشاركات
8,764
الإعجابات
756
#2
برنامج قيم


و مشاركة رائعة من اخ رائع



تحياتي
 

ENG.SAMEH

مهندس مدنى استشارى
التسجيل
15/4/09
المشاركات
292
الإعجابات
245
العمر
35
الإقامة
QATAR
#3
بارك الله فيك مشرفنا الغالى
 

lutfi salha

عضو مشارك
التسجيل
25/5/09
المشاركات
30
الإعجابات
0
#4
مشكور الاخ العزيز
 

magdyamdb

عضو فعال
التسجيل
13/8/08
المشاركات
109
الإعجابات
1
#5
dear sir, kindly link for crack is dead plz reupload it on mediafire.com or 4shared.com or ifile.it or mediafire.com thanks. best regards. dr. magdy
 

hassananas

عضو مميز
التسجيل
9/5/06
المشاركات
381
الإعجابات
46
#6

م. الباحث

عضو جديد
التسجيل
16/9/08
المشاركات
14
الإعجابات
0
#7
ارجو من الاخوة الكرام اعدة رفع الكراك مرة اخرى ولكم جزيل الشكر
 

hamdyprince

إستشاري
التسجيل
23/3/07
المشاركات
697
الإعجابات
150
العمر
56
#8
ارجو من الاخوة الكرام اعدة رفع الكراك مرة اخرى ولكم جزيل الشكر

ورحمه الله وبركاته

فعلا الكراك غير موجود

رجاء إعاده رفعه

جزاكم الله عنا كل خير

 

mostafaeid

عضو مشارك
التسجيل
22/2/09
المشاركات
42
الإعجابات
0
#9
مشكور اخى ونرجوا رفع الكراك
 
الحالة
موضوع مغلق

أعلى